[Update June]100% Accurate Cisco 300-135 Dumps PDF | Download Best 300-135 Exam TSHOOT v2.0 on Vimeo

By | June 21, 2017

This Pass4itsure 300-135 dumps is suitable for individuals who have at least one-year working experience in networking, and individuals who want to advance their skills, and work on complex networking solutions. An expert in this area has the capacity to improve network security and maximize performance, develop a global intranet, provide a wide range of application-oriented solutions to problems, install and configure networks to enhance bandwidth, boost reliability and increase the quality of service.

Exam Code: 300-135
Exam Name: Troubleshooting and Maintaining Cisco IP Networks (TSHOOT v2.0)
Updated: Jun 10, 2017
Q&As: 82
Exam Information: https://www.pass4itsure.com/300-135.html

Troubleshooting and Maintaining Cisco IP Networks (TSHOOT) The Pass4itsure 300-135 dumps provides you with Cisco router and switch hardware to gain hands on skills in troubleshooting Cisco and general networking technologies. Like the real world, the trouble ticket scenarios will be vague. For example, PC4 can’t reach the File Server.

300-135

Latest Pass4itsure 300-135 Dumps Exam Questions and Answers Updated (June 2017)#05-

QUESTION 5
Refer to the exhibit.
300-135

How would you confirm on R1 that load balancing is actually occurring on the default- network (0.0.0.0)?
A. Use ping and the show ip route command to confirm the timers for each default network resets to 0.
B. Load balancing does not occur over default networks; the second route will only be used for failover.
C. Use an extended ping along with repeated show ip route commands to confirm the gateway of last
resort address toggles back and forth.
D. Use the traceroute command to an address that is not explicitly in the routing table.
Correct Answer: D
QUESTION 6
In computer networking a multicast address is an identifier for a group of hosts that have joined a multicast
group. Multicast addressing can be used in the Link Layer (OSI Layer 2), such as Ethernet Multicast, as
well as at the Internet Layer (OSI Layer 3) as IPv4 or IPv6 Multicast. Which two descriptions are correct
regarding multicast addressing?
( choose two )
A. The first 23 bits of the multicast MAC address are 0x01-00-5E. This is a reserved value that indicates a
multicast application.
B. The last 3 bytes (24 bits) of the multicast MAC address are 0x01-00-5E. This is a reserved value that
indicates a multicast application.
C. To calculate the Layer 2 multicast address, the host maps the last 23 bits of the IP address into the last
24 bits of the MAC address. The high-order bit is set to 0.
D. The first 3 bytes (24 bits) of the multicast MAC address are 0x01-00-5E. This is a reserved value that
indicates a multicast application.
Correct Answer: CD
QUESTION 7
You have been brought in to troubleshoot an EIGRP network. A network engineer has made configuration
changes to the network rendering some locations unreachable. You are to locate the problem and suggest
solution to resolve the issue.

300-135

R5 has become partially isolated from the remainder of the network. R5 can reach devices on directly
connected networks but nothing else. What is causing the problem?
A. An outbound distribute list in R3
B. Inbound distribute lists in R5
C. An outbound distribute list in R6
D. Incorrect EIGRP routing process ID in R5
300-135 pdf Correct Answer: B
QUESTION 8
– (Topic 18)
The implementations group has been using the test bed to do a `proof-of-concept’ that requires both Client
1 and Client 2 to access the WEB Server at 209.65.200.241. After several changes to the network

addressing, routing schemes, DHCP services, NTP services, layer 2 connectivity, FHRP services, and
device security, a trouble ticket has been opened indicating that Client 1 cannot ping the 209.65.200.241
address.
Use the supported commands to isolate the cause of this fault and answer the following question.
The fault condition is related to which technology?
A. NTP
B. IP DHCP Server
C. Ipv4 OSPF Routing
D. Ipv4 EIGRP Routing.
E. Ipv4 Route Redistribution.
F. Ipv6 RIP Routing
G. Ipv6 OSPF Routing
H. Ipv4 and Ipv6 Interoperability
I. Ipv4 layer 3 security.
Correct Answer: B
QUESTION 9
– (Topic 18)
The implementations group has been using the test bed to do a `proof-of-concept’ that requires both Client
1 and Client 2 to access the WEB Server at 209.65.200.241. After several changes to the network
addressing, routing schemes, DHCP services, NTP services, layer 2 connectivity, FHRP services, and
device security, a trouble ticket has been opened indicating that Client 1 cannot ping the 209.65.200.241
address.
Use the supported commands to isolate the cause of this fault and answer the following question.
What is the solution to the fault condition?
A. Under the global configuration, delete the no ip dhcp use vrf connected command.
B. Under the IP DHCP pool configuration, delete the default -router 10.2.1.254 command and enter the
default-router 10.1.4.5 command.
C. Under the IP DHCP pool configuration, delete the network 10.2.1.0 255.255.255.0 command and enter
the network 10.1.4.0 255.255.255.0 command.
D. Under the IP DHCP pool configuration, issue the no ip dhcp excluded-address 10.2.1.1 10.2.1.253
command and enter the ip dhcp excluded-address 10.2.1.1 10.2.1.2 command.
300-135 vce Correct Answer: D
QUESTION 10
– (Topic 16)
The implementations group has been using the test bed to do a `proof-of-concept’. After several changes
to the network addressing, routing schemes, a trouble ticket has been opened indicating that the loopback
address on R1 (2026::111:1) is not able to ping the loopback address on DSW2(2026::102:1).
Use the supported commands to isolated the cause of this fault and answer the following questions.
On which device is the fault condition located?
A. R1
B. R2
C. R3
D. R4
E. DSW1

F. DSW2
G. ASW1
H. ASW2
Correct Answer: B
QUESTION 11
The implementations group has been using the test bed to do a `proof-of-concept’ that requires both Client
1 and Client 2 to access the WEB Server at 209.65.200.241. After several changes to the network
addressing, routing scheme, DHCP services, NTP services, layer 2 connectivity, FHRP services, and
device security, a trouble ticket has been opened indicating that Client 1 cannot ping the 209.65.200.241
address.
Use the supported commands to isolated the cause of this fault and answer the following questions.
What is the solution to the fault condition?
A. Enable OSPF authentication on the s0/0/0 interface using the ip ospf authentication message-digest
command
B. Enable OSPF routing on the s0/0/0 interface using the network 10.1.1.0 0.0.0.255 area 12 command.
C. Enable OSPF routing on the s0/0/0 interface using the network 209.65.200.0 0.0.0.255 area 12
command.
D. Redistribute the BGP route into OSPF using the redistribute BGP 65001 subnet command.
Correct Answer: A
QUESTION 12
– (Topic 10)
The implementations group has been using the test bed to do a `proof-of-concept’ that requires both Client
1 and Client 2 to access the WEB Server at 209.65.200.241. After several changes to the network
addressing, routing scheme, DHCP services, NTP services, layer 2 connectivity, FHRP services, and
device security, a trouble ticket has been opened indicating that Client 1 cannot ping the 209.65.200.241
address.
Use the supported commands to isolated the cause of this fault and answer the following questions.
What is the solution to the fault condition?
A. Under the interface Serial0/0/0 configuration enter the ip nat inside command.
B. Under the interface Serial0/0/0 configuration enter the ip nat outside command.
C. Under the ip access-list standard nat_trafic configuration enter the permit 10.2.0.0 0.0.255.255
command.
D. Under the ip access-list standard nat_trafic configuration enter the permit 209.65.200.0 0.0.0.255
command.
Correct Answer: C
300-135 QUESTION 13
– (Topic 15)
The implementations group has been using the test bed to do a `proof-of-concept’ that requires both Client
1 and Client 2 to access the WEB Server at 209.65.200.241. After several changes to the network
addressing, routing scheme, DHCP services, NTP services, layer 2 connectivity, FHRP services, and
device security, a trouble ticket has been opened indicating that Client 1 cannot ping the 209.65.200.241
address.
Use the supported commands to isolated the cause of this fault and answer the following questions.
The fault condition is related to which technology?

A. Under the global configuration mode enter no access-list 10 command.
B. Under the global configuration mode enter no access-map vlan 10 command.
C. Under the global configuration mode enter no vlan access-map test1 10 command.
D. Under the global configuration mode enter no vlan filter test1 vlan-list 10 command.
Correct Answer: C

300-135

By completing the Pass4itsure 300-135 dumps you will improve your practical troubleshooting skills in routing protocols including EIGRP, OSPF, OSPFv3 and BGP, route redistribution, interface configuration, layer 2 problem solving including VTP, VLANs, trunks and port-channels, access-lists and traffic filters and many more networking technologies. These same tasks will help you understand the 300-135 exam objectives and competencies required by the Cisco Certified Network Professional TSHOOT exam.

It is also likely that you will receive the same scenario multiple times in different trouble tickets. This is not a typo or a mistake as the exam is designed this way. The topology and the scenario might be the same, but the reason for the lack of connectivity will be completely different for each of the https://www.pass4itsure.com/300-135.html 300-135 dumps. It is up to you to determine why the current situation exists in the presented trouble ticket by executing various Cisco IOS show commands and using everyone’s favorite tool, PING.