[Update June]Download 100% Valid 210-255 Dumps | Latest CCNA Cyber Ops 210-255 Dumps Questions on Vimeo

By | June 6, 2017

You can make yourself demanding by passing the Implementing Cisco Cybersecurity Operations exam and we can help you out in passing Pass4itsure 210-255 dumps if you get the 210-255 dumps prepared by our Cisco certified expert. You can make preparation from our 210-255 dumps training material designed for exam Code practice test and get success in this 210-255 exam in first attempt.

Exam Code: 210-255
Exam Name: Implementing Cisco Cybersecurity Operations
Updated: May 30, 2017
Q&As: 65
Exam Information: http://www.pass4itsure.com/210-255.html

Get Accurate & Updated Real Pass4itsure 210-255 Dumps Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

  • Based on Real 210-255 Exams Scenarios.
  • Free 210-255 Dumps Updates for both PDF and Test Engine.
  • Instant Download After Purchase for 99% of Exams.
  • Guarantee 210-255 test pass or your moneny back.

210-255

Latest Pass4itsure 210-255 Dumps Exam Questions and Answers Updated (June 2017)#52-65

QUESTION 52
Which TWO of the following statements about handling a CRT are true? (Choose two)
A. A discharged CRT can build up a secondary charge over time.
B. You should wear a grounding wrist strap or heel trap when discharging a CRT.
C. You must attach the discharge tool to ground before using it to discharge a CRT.
D. You should wear a grounding wrist strap or heel strap when performing live adjustments.
E. You must disconnect the power cord and discharge the CRT before performing live adjustments.
Correct Answer: AC
QUESTION 53
Why do you need to take precautions when disposing of damages CRT displays? (Select two.)
A. CRT displays may contain toxic waste.
B. CRT displays may present a fire hazard.
C. CRT displays may implode if mishandled.
D. CRT displays may present a radiation hazard.
E. CRT displays may contain hazardous materials.
Correct Answer: CE
QUESTION 54
What precautions should be taken if an discharged CRT must remain exposed for any length of time?
A. You should reset the Power Manager Unit on the logic board.
B. You should perform a full set of video adjustments on the CRT.
C. You should remove the CRT from the computer or display assembly.
D. You should establish an ongoing lead between the CRT anode and ground.

Correct Answer: D
QUESTION 55
Which part or parts of an iMac CRT display should NOT be touched until after the display is disconnected from its power source and the CRT is properly discharged, because of the risk of electric shock? Select all that apply.
A. Anode cap
B. Yoke assembly
C. Flyback transformer
D. Front of CRT display
E. Yoke cable/connector
F. Outer plastic housing

Correct Answer: ABCE
QUESTION 56
When making LIVE adjustments to a CRT display, you should make sure that _____. Select three
A. You are NOT grounded.
B. The CRT has been discharged.
C. The yoke wires have been disconnected.
D. You use an ungrounded electrical outlet.
E. The equipment is properly connected and grounded.
F. Your building’s electrical outlets are properly wired and grounded.

Correct Answer: AEF
QUESTION 57
You need to verify a defective power/analog video board on a CRT iMac system. You removed power from the system and opened it (exposing the CRT), then had to leave it to do other work. Two hours have passed. Which TWO of the following steps should you take before beginning the verification procedure? Select two.
A. Reassemble the iMac.
B. Discharge the CRT again.
C. Reapply power to the iMac.
D. Get someone to observe you.
E. Check your grounding wrist strap.
Correct Answer: BD
QUESTION 58
Which of the following do you use when discharging a CRT? Select two.
A. light meter
B. safety glasses
C. grounded ESP mat
D. CRT discharge tool
E. jumper adjustment tool
Correct Answer: BD
QUESTION 59
When discharging a CRT, which part do you touch with the tip of the discharge tool?
A. anode aperture
B. high voltage cable
C. Flyback transformer
D. yoke connector/cable

Correct Answer: A QUESTION 60
Which of the following is a hazardous area due to high voltage even when an eMac is unplugged?
A. Anode cap
B. Hard drive
C. Logic board
D. Optical drive

Correct Answer: A QUESTION 61
Where is the BEST place to look for information about any special hardware repair tools required for disassembly of an Apple product?
A. Discussions
B. Service News
C. User’s Manual
D. Service Manual

Correct Answer: D QUESTION 62
Which section of the Power Mac G5 Service Manual is the BEST place to look for instructions for replacing a processor?
A. Views
B. Basics
C. Take Apart
D. Troubleshooting

Correct Answer: C QUESTION 63
You require additional information about a specific problem with a customer’s Power Mac G5. Which of the following would be the choice Apple recommends for you to research the problem and possibly locate a solution or workaround for the problem?
A. Downloads
B. Discussions
C. User’s Manual
D. Knowledge Base

Correct Answer: D QUESTION 64
A customer asks about RAM speed requirements to upgrade his eMac (USB 2.0). What Apple resource should you refer this customer to?
A. Downloads
B. User’s Manual
C. Specifications
D. Service Manual

Correct Answer: C
QUESTION 65
According to Apple service manuals, what steps should you take before performing any take-apart steps when replacing a part in any Apple product?
A. Lay the product on its side so it will not fall over.
B. Update the product’s firmware to the latest version.
C. Discharge the CRT and establish an ongoing ground.
D. Gather all necessary tools and perform all preliminary steps.
E. Order all available service parts for the appropriate configuration of the product.

Correct Answer: B

210-255

Just click the mouse at Pass4itsure.com and our workers confirm your payment, you will get the instant access to the whole Cisco 210-255 dumps training materials. Make full use of the free PDF demos. Download the test engine software on your PC and practice the test everyday. Make notes on the errors and pay more attention on them. We promise that you will get a high passing mark based on our updated Cisco 210-255 exam braindumps.

Pass4itsure provide latest and updated Practice Test with Actual Exam Questions and Answers for new syllabus of Cisco 210-255 dumps. Practice our Real Questions and Answers to Improve your knowledge and pass your exam with High Marks. We ensure your success in the Test Center, covering all the topics of exam and build your Knowledge of the http://www.pass4itsure.com/210-255.html 210-255 dumps. Pass4itsure with our accurate questions.

 

         

Loading Facebook Comments ...

Leave a Reply

Your email address will not be published. Required fields are marked *